Showing posts with label cricut. Show all posts
Showing posts with label cricut. Show all posts

Monday, November 28, 2011

Cricut Cake Princess castle cake!

My younger daughter is turning four, and loves princesses and Disney, so for her cake this year I wanted to make something special. It's her first "big girl" party with her own friends coming, so she was pretty excited! I used my Cricut Cake machine: a great purchase, but I have some pretty important tips for new users. Hope they help, since it's much different than cutting paper!

First, here's the finished cake. It is a vanilla flavoured cake with buttercream filling and icing. It's pretty smooth on the outside, and might look like fondant covered, but the only fondant is the pink/purple castle and words.



It's a tall cake, about 6" high.




My big helper (behind) and the birthday girl (in front)



The wire wiggly thingies were added on location. Looked really cute and finishing, but they don't travel well and can move around too much. Blowing out the candles:




The inside (which was yummy, even if the colours are horrifically neon!)



So, here are my tips and recipes that I've found are most successful:

General cake decorating tips:


Start early!

The cake won't go stale, and the cake itself needs time to "settle" if you're making a stacked cake! If you need it for Saturday I follow this schedule:
Wednesday: Bake cake, allow to cool. Level, fill and crumb coat. Set aside (in fridge if filling is perishable).
Thursday: Make fondant. Wrap up tightly and set aside. Apply top layer of buttercream to sides and top. Smooth well.
Friday: Decorate with fondant. Cover with plastic wrap, and you're ready for tomorrow!

Level your cake

Please, I beg you: Level it with a big long serrated bread knife. Cut off the dome on top and have a nice snack, or feed it to the kids!
If you don't level each layer, you may not notice it on the bottom layers, but the top ones will be clearly domed and it's next to impossible to fix it with filling:


Use gel food colouring, not the grocery store liquid stuff





Believe me, it's worth it. Don't use much: this whole cake was tinted with under 1 teaspoon of total colour! The cakes used 1/4 tsp of each Violet or Rose Wilton gel colour, and the fondant about the same. I use a knife tip and just dip it out. You don't need much (except for black or red, but that's a different blog post :-) It's available many places, including Walmart and Michaels.

Smooth your buttercream


I use an off-center spreading palette, and dip it in hot water. This prevent too much sticking, and melts it just a little to get a nice finish. Clean off and dip often!

Marshmallow Fondant:


Here's the recipe I use. This made enough fondant to do this cake with about 1/5 of it leftover.


A small amount of Crisco shortening(not margarine nor butter)
8 oz marshmallows
15 oz icing sugar (powdered sugar)
1 to 2 tablespoons water

Rub a glass bowl with the shortening to coat. Add marshmallows and water. Melt in microwave, heating for 30 seconds, then stirring, and repeat until they are melted.

Rub a mixing bowl or the bowl of a bread machine bowl with more shortening. Dump in melted marshmallows and add icing sugar. Mix with a bread hook or paddle. Allow to kneed, at least 5 minutes. You're looking for a ball of fondant that has everything included, no dry bits, but not sticking to the sides of the bowl. If it's sticky, add a small amount of icing sugar, a tablespoon at a time. If there's dry material still, add water, drop by drop. This is the trickiest part: You want the fondant to be leaving the sides of the bowl, just past the sticky point, but not in any way dry. It takes practice. Start early!

Smear a piece of plastic wrap with shortening, and wrap up the fondant tightly. Wrap in another piece of plastic wrap, then put in a baggie. Set aside for at least a day.

To tint: Wearing clean plastic gloves, wse gel colors and add a little bit of color (1/4 tsp at most) to a small ball of gel. Kneed until evenly distributed. Return the tinted ball to the remainder, then kneed until completely added and coloured. Gel colors tend to develop over time, so the colour might enhance over the next day. You don't need too much color for this step!

MMF Tips:

Start early!

Use a dough hook or your bread machine, lid left open so it doesn't heat

Weigh your measurements


Baking is tricky and measuring by cups is highly inaccurate. It's best to scale your measurements if possible. My kitchen scale was fairly inexpensive, and is my most used baking tool!

Cricut Cake Tips:


Did I mention this one already?

Start early!


Cricut cake is tricky at first, until you get the feel of your machine and how to cut best. I live in a VERY dry environment, so I think this helps me with fondant, but make sure you have lots and lots of time to work with your cake.

Roll out you fondant thinly and evenly


I can just start to make out the circle lines on my mat with my fondant. That's my best thickness for fondant. Thinner and it's too hard to hold it's shape when taking off the mat, thicker and it takes multiple passes to cut.

Freeze it!


After rolling out, I freeze my mat with fondant on it, for about 20 minutes. I've left it for up to 5 hours, and it was fine as well.

Use multiple mats


I had three mats going with this design, so I could be cutting while the other two were freezing.

Test your design on paper, if you can


I have a cricut expression as well, so I precut my intended designs on it with paper first, then tried to up against my cake to ensure a good fit. It makes tweaking measurements a little easier and faster.

Getting stuff off the mat and onto the cake

First, "weed" the cut. This means to take off all the excess fondant from the design, including inside the piece. Save this fondant, you can reroll and reuse. Don't try to lift the piece with a knife or spatulla, you could bend it. Instead, flip the mat over onto a piece of wax paper. Bend the mat upwards, and use the tip of a knife or thin metal spatula to start the fondant peeling off on the wax paper. The fondant should be touching the wax paper as you continue to bend the mat backwards. You can give it some help with the spatula, but it should start to peel off all on it's own. You'll be left with the fondant perfectly shaped, but upside down on the wax paper (that's good!). Brush the back of it lightly with plain water, then attach it to the cake. Peel off the wax paper, and you're done!

Buttercream Recipe:


3.6 oz shortening
4 oz margarine
2 tablespoons milk or cream
16 oz icing sugar (powdered sugar)

Cream together shortening and margaring in a large mixing bowl. Add sugar slowly until all incorporated. Add milk, then beat thoroughly until light and fluffy.
If too stiff, add milk drop by drop until easier to use; if too thin/soft, add sugar by the tablespoon. Environmental conditions will impact the siffness/softness of your buttercream, so adjust to suit your kitchen. Keep icing covered with plastic wrap so it doesn't dry out when not in use.

Okay, that's all my tips and recipes for today. Hope that help you get more use out of your cake. It's so worth learning how to use it!!

Friday, November 26, 2010

This week's challenge on My Sheri Crafts blog is "Hello"! I thought about using this expression in an unexpected way, on a LO. So, here's my "Hello Reader" LO of Hannah as a baby, reading a fabric book:





Love all the glitter on this page. It doesn't come through as nicely on the photos, but "Hello" and Elmo's book are Stickled!

Supplies:
Sesame Street and Friends Cricut cartridge
Stickles
Foam Dots and adhesive
Paper: Me and My Big Ideas, "A Kid Like Me"
Font for "Hello": Vivaldi, cut with Sure Cuts A Lot 2

Saturday, November 20, 2010

Cutting Chocolate with Cricut

My lovely eldest daughter has her 8th birthday fast approaching, and since it's in mid-December, we decided to have her party this weekend. I've always wanted to try cutting edible materials with my cricut, so I got out my retired Baby Bug, washed her down, got out my deep cut blade housing and set up for some edible cutting!

I made some Marshmallow Fondant and melted some white chocolate and coloured it with pink food colouring. I made some cuts on the fondant, which were quite successful, but DD decided she wanted the bunny pan instead of a round cake decorated. I still used the fondant for decorating, but only cut DD's name with the white chocolate. I think it turned out really nice, and she was thrilled!



Thursday, November 11, 2010

My Sheri Crafts -- Bears!

My Sheri Crafts challenge this week is Teddy Bear themed. I found this old photo of me, and decided I'd make a cute little Teddy LO for my "All About Me" book:



November 1st I was able to download six free cricut cartridges for my Gypsy, and fortunately I only had one already. I was thrilled to gain the Christmas solutions cartridge, as I'd already wanted it but couldn't justify buying it since I already had Christmas Cheer and Winter Woodland. Here's my first cut from it, the teddy bear:



He's embossed with the A2 embossing folder, Textile Texture. I cut first, then used a cricut marker, then ran through my cuttlebug and chalked with Pebbles Chalk. Love that stuff, love the effect.



I'm forever a sucker for some of the MS punches, so this one got me last week. It's a new one, called Cherish. It's a PATP set, and it's beautiful! I'm sure it'll make it on to many of my LOs!



Supplies:
DVWC WB Gypsy Baby Stack
Martha Stewart Cherish Punch
Ribbon
Martha Stewart Antique Gold Glitter
Cuttlebug A2 embossing folder, Textile Texture
Pebbles Chalk

Tuesday, August 3, 2010

Baby you can Drive my Car!

Oh Baby! Was this one ever fun to do! I scraplifted this design from summer 2010 Scrapbooking and Beyond, but my pic is from 2008 when Wiggles was 9 months old (wow, what a healthy sized baby! LOL) I rarely fussy-cut photos, but this one begged for this treatment!



Paper: NRN Designs and solid cardstock
Title: "Baby" from Gypsy Wanderings (cricut), "car" from Nursery Rhymes, "you can drive my" are stickers
Tree: Zooballo; Sun: Gypsy Wanderings accented with Straw distress Stickles

Sunday, April 25, 2010

Community Helpers Poster

My youngest daughter's daycare is so wonderful, but they don't have much "stuff"! They ask for volunteers, but people are busy, and they don't get a lot of help. So, my older daughter, Hannah, has started to volunteer her time and effort for the benefit of the daycare. Two weekends ago, she helped her daddy fix the gates on the daycare. This weekend, she helped me cut and assemble a new poster for the toddlers, called "Community Helpers":



We used Cuttin Up for the title, and Everyday Paper Dolls for all the people. Faces are hand-drawn. We cut the people in white, and Hannah coloured them with my most favorite markers for kids, the Crayola Multicultural colours. These are sometimes hard to find, but they come in markers, pencil crayons and crayons. The set of 8 has all sorts of skin tones. Did I say I love them?







I hope you'll leave a comment for Hannah. She's seven and a Brownie and is learning the value of community service. This is her first self-motivated volunteer activity, and I'm very proud of her!